VerbanDrillStops

VerbanDrillstops are made specific for many different implant drills.

The stops are specific for drill type and handpiece type.

For the Implant Direct Implant system the stops are available for the short and long drills. For the short drills they are available for 6-8-10 mm osteotomies and for the long drills they are available in 6-8-10-11.5-13mm osteotomies.

VerbanDrillstops are handpiece specific. Compatible with Nouvag Push Button, X-Cube Push Button, NSK SGM 20:1. Only long stops are available for the Nouvag Latch.

Each stop is compatible with the 2.0 through 4.8 drill. An o-ring is required for the 2.0/2.3 drill.

The outside diameter of the stop is 5.27 mm. When used with CBCT generated surgical guides the recommended opening(internal diameter) of the guide should be between 5.3 and 5.5mm. The larger opening will provide direction of axis with no binding of the stop with the guide.

VerbanDrillStops instructional sheet